Upgrade notes

This page is intended to deal with specific, special circumstances you may encounter when upgrading between versions of Charmed Kubernetes. The notes are organised according to the upgrade path below, but also be aware that any upgrade that spans more than one minor version may need to beware of notes in any of the intervening steps.

Upgrades to all versions deployed to Juju’s localhost LXD based cloud

There is a known issue (https://bugs.launchpad.net/juju/+bug/1904619) with container profiles not surviving an upgrade in clouds running on LXD. If your container-based applications fail to work properly after an upgrade, please see this topic on the troubleshooting page

Upgrading to 1.29

There are several important changes starting in 1.29 that will affect all users:

  • kubeapi-load-balancer, kubernetes-control-plane, and kubernetes-worker charms can be observed using the COS rather than LMA.
  • Dropped specific relations and features which are outsourced to other charms

Observability Relations

These represent relations which were removed in favour of observability with the Canonical Observability Stack(COS).

LMA Relations:

  • nrpe-external-master (provides: nrpe-external-master on KCP and KW)
  • prometheus (provides: prometheus-manual on KCP)
  • scrape (provides: prometheus on KW)
  • grafana (provides: grafana-dashboard )

In order to prepare for observability, see the Integration with COS Lite docs which can be performed following an upgrade of the charms but prior to an upgrade of the Kubernetes cluster.

kube-api-endpoint relation dropped

The kubernetes-control-plane:kube-api-endpoint and kubernetes-worker:kube-api-endpoint relations have been removed since these APIs are provided by the kube-control relation. Ensure these two apps are linked by kube-control relation before removing this relation.

juju integrate kubernetes-control-plane:kube-control kubernetes-worker:kube-control
juju remove-relation kubernetes-control-plane:kube-api-endpoint kubernetes-worker:kube-api-endpoint

loadbalancer relation dropped

The kubernetes-control-plane:loadbalancer relation has been removed in favour of using the loadbalancer-internal and loadbalancer-external relations.

juju integrate kubernetes-control-plane:loadbalancer-internal kubeapi-loadbalancer
juju integrate kubernetes-control-plane:loadbalancer-external kubeapi-loadbalancer
juju remove-relation kubernetes-control-plane:loadbalancer kubeapi-loadbalancer

openstack relation deprecated

The kubernetes-control-plane:openstack relation is being deprecated.

Integration with openstack is still important with Charmed Kubernetes, but continues that integration through the charms openstack-cloud-controller and cinder-csi. These two charms better manage versions of those deployment integrations with Kubernetes. See openstack-integration for more details on using these charms.

After upgrading the kubernetes-control-plane charm, the unit may enter blocked status with the message: openstack relation is no longer managed.

If you see this message, you can resolve it by removing the openstack relation:

juju deploy openstack-cloud-controller --channel=1.29/stable
juju deploy cinder-csi --channel=1.29/stable
juju integrate openstack-cloud-controller openstack-integrator
juju integrate cinder-csi openstack-integrator
juju integrate openstack-cloud-controller:kube-control             kubernetes-control-plane:kube-control
juju integrate openstack-cloud-controller:external-cloud-provider  kubernetes-control-plane:external-cloud-provider
juju integrate openstack-cloud-controller:openstack                openstack-integrator:clients
juju integrate kubernetes-control-plane:kube-control               cinder-csi:kube-control
juju integrate openstack-integrator:clients                        cinder-csi:openstack
#   The following could be vault:certificates instead of easyrsa:client
#   Check what supplies the certificates for the kubernetes-control-plane
juju status kubernetes-control-plane --relations | grep ':certificates'
juju integrate openstack-cloud-controller:certificates             easyrsa:client   
juju integrate cinder-csi:certificates                             easyrsa:client

# Wait for the units to be active/idle, then
juju remove-relation kubernetes-control-plane:openstack            openstack:clients

nvidia gpu operator deprecated

The kubernetes-control-plane has allowed the configuration of enable-nvidia-plugin=auto where it would automatically detect a worker node ready for GPU workloads and deploy the nvidia-plugin operator into the cluster.

After upgrading the kubernetes-control-plane charm, the unit may enter blocked status with the message: nvidia-plugin is no longer managed.

If you see this message, you can resolve it by following the nvidia-gpu-operator docs to deploy a new charm. Once deployed, correcting the config enable-nvidia-plugin

juju config kubernetes-control-plane enable-nvidia-plugin=false

ceph-client relation deprecated

The kubernetes-control-plane:ceph-client relation is being deprecated starting in the 1.29 release of charmed-kubernetes

Ceph integration is still a priority, but continues with the ceph-csi charm which integrates Ceph with Kubernetes.

After upgrading the kubernetes-control-plane charm, the unit may enter blocked status with the message: ceph-client relation deprecated, use ceph-csi charm instead.

If you see this message, you can resolve it by removing the ceph-client relation and deploying the ceph-csi charm to mimic the previous behaviour.

juju deploy ceph-csi --channel=1.29/stable --config release="v3.8.1"
juju integrate ceph-csi:ceph-client ceph-mon
juju remove-relation kubernetes-control-plane:ceph-client ceph-mon
juju integrate ceph-csi:kubernetes kubernetes-control-plane

Keystone/K8s Authentication management

Charmed Kubernetes was installing and managing an older version of keystone-auth which manages authentication and authorisation through Keystone.

This service is better suited to be managed externally from the kubernetes-control-plane charm. However, the charm provides the following upgrade method to maintain the deployment of this service beyond 1.28.

One can determine if Keystone management is applicable with:

juju status --relations | grep kubernetes-control-plane:keystone-credentials

If this is empty, no steps regarding Keystone management are required.

If this states:

keystone:identity-credentials  kubernetes-control-plane:keystone-credentials   keystone-credentials    regular

…then you’ll need to prepare a bit before the upgrade.

Resources

The upstream Keystone docs cover keystone-auth in detail and should be the main reference for implementation details.

Keystone has two “Auth” options:

  1. Authentication of users only called keystone-authentication
  2. Authentication and authorisation of users, called keystone-authorization

Both options require the deployment and management of the k8s-keystone-auth webhook service, a deployment which provides a service endpoint for the kubernetes-api-server to use as an intermediate to interact with an external Keystone service.

Preparation

Starting from version 1.29, the kubernetes-control-plane charm will drop the following:

  • kubernetes-control-plane:keystone-credentials relation
  • keystone-policy config
  • enable-keystone-authorization config
  • keystone-ssl-ca config

Before upgrading, it is important to capture the state of these config options:

mkdir keystone-upgrade
juju config kubernetes-control-plane keystone-policy > keystone-upgrade/keystone-policy.yaml
juju config kubernetes-control-plane enable-keystone-authorization > keystone-upgrade/keystone-authorization
juju config kubernetes-control-plane keystone-ssl-ca | base64 -d > keystone-upgrade/keystone-webhook-ca.crt
juju exec -u kubernetes-control-plane/leader -- 'cat /root/cdk/keystone/webhook.yaml' > keystone-upgrade/webhook.yaml

Migration

After upgrading, the charm will enter a blocked state with the status message: Keystone credential relation is no longer managed. This indicates that the k8s-keystone-auth webhook service is still running, but is no longer managed.

If keystone-upgrade/keystone-authorization contains true, then the webhook should be enabled. This command adds the Keystone authorisation webhook config and the Webhook authorisation mode:

juju config kubernetes-control-plane \
    authorization-webhook-config-file="$(cat keystone-upgrade/webhook.yaml)" \
    authorization-mode="Node,RBAC,Webhook"

Finally, acknowledge the charm no longer manages Keystone by removing the relation:

juju remove-relation kubernetes-control-plane:keystone-credentials keystone

Day 2 Operations Manually

After migration, the deployment, service, secrets, and policies associated with keystone-auth are no longer handled by the kubernetes-control-plane charm.

The following components remain in the cluster, unmanaged by the charm, and should be considered managed by the cluster administrators.

  • Deployment/kube-system/k8s-keystone-auth
  • Service/kube-system/k8s-keystone-auth-service
  • Secret/kube-system/keystone-auth-certs
  • ConfigMap/kube-system/k8s-auth-policy
  • ClusterRole/k8s-keystone-auth

Day 2 Operations via Charm

The keystone-k8s-auth charm also provides management of these above resources. The charm can be installed after the 1.29 upgrade, and used to manage these resource.

See keystone-k8s-auth for more details

Administrative Actions missing

The kubernetes-control-plane and kubernetes-worker actions list was substantially reduced during development of 1.29. The following are no longer present, but are slated to be reintroduced:

  • restart
  • namespace-list
  • namespace-create
  • namespace-delete
  • user-create
  • user-delete
  • user-list
  • apply-manifest

CIS-Benchmark Action missing

The kubernetes-control-plane and kubernetes-worker action for cis-benchmark were removed during the development of the 1.29 charms and an engineering decision to reintroduce these actions are on-going, but development and testing incomplete. Details in LP#2044219

Automatic labelling of GPU nodes

While current worker nodes would remain unaffected as they would already be labelled, the worker charm in 1.29 no longer labels the nodes with gpu=true and cuda=true.

Parity with this feature has been attained by using the nvidia-gpu-operator

Upgrading to 1.24

There are several important changes to 1.24 that will affect all users:

  • Charms have migrated to the Charmhub.io store.
  • Control-plane units will switch to a new charm named kubernetes-control-plane.The application in the juju model and all relations to it will remain under the same name kubernetes-master, only the charm supporting the application will switch. See inclusive-naming for an explanation about this.

Due to these and other changes, it is recommended to follow the specific upgrade procedure described in the upgrading to 1.24 docs.

ceph-storage relation deprecated

The kubernetes-control-plane:ceph-storage relation has been deprecated. After upgrading the kubernetes-control-plane charm, the charm may enter blocked status with the message: ceph-storage relation deprecated, use ceph-client instead.

If you see this message, you can resolve it by removing the ceph-storage relation:

juju remove-relation kubernetes-control-plane:ceph-storage ceph-mon

Upgrading to 1.19

New in 1.19, master units rely on Kubernetes secrets for authentication. Entries in the previously used “basic_auth.csv” and “known_tokens.csv” will be migrated to secrets and new kubeconfig files will be created during the upgrade. Administrators should update any existing kubeconfig files that are used outside of the cluster.

There is a known issue with etcd 3.2 and Kubernetes 1.19. If you are still running etcd 3.2, upgrade to etcd 3.4 prior to upgrading Kubernetes.

As of Kubernetes 1.19, kube-proxy’s userspace proxier no longer works. Before you upgrade, check the proxy-extra-args configs to make sure that the userspace proxy mode is not being used in your cluster:

juju config kubernetes-master proxy-extra-args
juju config kubernetes-worker proxy-extra-args

If you see proxy-mode=userspace in the charm configs, remove it, then proceed with the upgrade.

Please follow the upgrade instructions for 1.19.

Upgrading to 1.18

CDK Addons

As stated in the release notes, from 1.18, the cluster-monitoring addons (Heapster, InfluxDB, and Grafana) have been removed from the Kubernetes source tree and therefore removed from the cdk-addons snap as well.

Customers relying on these addons should migrate to a metrics-server solution prior to upgrading.

Note: these removals do not affect the Kubernetes Dashboard nor the methods described in Monitoring Charmed Kubernetes.

Upgrading to 1.16

Docker Registry with Containerd

Prior to 1.16, some fixes were required to support using the Docker Registry charm with Containerd.

This charm, if used, is now supported through standard relations. Before upgrading, remove any reference of the registry in the custom_registries containerd charm configuration.

After upgrading, see the docker registry instructions for details of how to configure a registry.

Admission control plugins

In Charmed Kubernetes 1.16, the API server parameter by which additional, non-default admission control plugins is specified has changed. The old parameter was --admission-control; the new parameter is --enable-admission-plugins.

For example, prior to 1.16, The ‘PodSecurityPolicy’ admission plugin could be applied like this:

juju config kubernetes-master api-extra-args="admission-control=PodSecurityPolicy"

As of 1.16, this changes to:

juju config kubernetes-master api-extra-args="enable-admission-plugins=PodSecurityPolicy"

If using non-default admission plugins, be sure to upgrade your charm config accordingly after upgrading to 1.16.

Upgrading to 1.15

This upgrade switches the container runtime to make use of containerd, rather than Docker. You have the option of keeping Docker as the container runtime, but even in that case you must perform the upgrade steps. To facilitate different container runtimes, the architecture of Charmed Kubernetes has changed slightly, and the container runtime is now part of a separate, subordinate charm rather than being included in the kubernetes-master and kubernetes-worker charms.

To keep Docker as the container runtime

Docker is currently installed on your kubernetes-worker units. The Docker subordinate charm includes clean-up code to manage the transition to the new pluggable architecture. To upgrade whilst retaining Docker as the runtime, you need to additionally deploy the new charm and add relations to the master and worker components:

juju deploy docker
juju add-relation docker kubernetes-master
juju add-relation docker kubernetes-worker

The upgrade is complete, and your worker nodes will continue to use the Docker runtime. For information on configuring the Docker charm, see the Docker configuration page.

To migrate to containerd

If you intend to switch to containerd, it’s recommended that you first add some temporary extra worker units. While not strictly necessary, skipping this step will result in some cluster down time. Adding temporary additional workers provides a place for keeping pods running while new workers are brought online. The temporary workers can then be removed as the pods are migrated to the new workers. The rest of these instructions assume that you have deployed temporary workers.

Deploy temporary workers

CURRENT_WORKER_REV=$(juju status | grep '^kubernetes-worker\s' | awk '{print $7}')
CURRENT_WORKER_COUNT=$(juju status | grep '^kubernetes-worker/' | wc -l | sed -e 's/^[ \t]*//')

juju deploy kubernetes-worker-$CURRENT_WORKER_REV  kubernetes-worker-temp -n $CURRENT_WORKER_COUNT

Add necessary relations

juju status --relations | grep worker: | awk '{print $1,$2}' | sed 's/worker:/worker-temp:/g' | xargs -n2 juju relate

Wait for the temporary workers to become active before continuing. Upgrade the master and worker charms:

juju upgrade-charm kubernetes-master
juju upgrade-charm kubernetes-worker

The kubernetes-worker units will enter a blocked state, with status message “Connect a container runtime.”

Deploy and relate the new Docker charm

This step is needed even if you do not intend to use Docker following the upgrade. Docker is already installed on your kubernetes-worker units, and the Docker subordinate includes clean-up code to uninstall Docker when the Docker charm is replaced with the containerd charm.

juju deploy docker
juju add-relation docker kubernetes-master
juju add-relation docker kubernetes-worker

Switching to Containerd

Now, pause the existing workers, which will move pods to the temporary workers.

juju run-action [unit] pause

For example:

juju run-action kubernetes-worker/0 pause --wait
juju run-action kubernetes-worker/1 pause --wait
juju run-action kubernetes-worker/2 pause --wait

One-liner:

juju status | grep ^kubernetes-worker/ | awk '{print $1}' | tr -d '*' | xargs -n1 -I '{}' juju run-action {} pause --wait

Remove Docker

This will uninstall Docker from the workers.

juju remove-relation docker kubernetes-master
juju remove-relation docker kubernetes-worker
juju remove-application docker

Deploy Containerd

juju deploy containerd
juju add-relation containerd kubernetes-master
juju add-relation containerd kubernetes-worker

Resume workers

Now we can allow pods to be rescheduled to our original workers.

juju run-action [unit] resume --wait

E.g.

juju run-action kubernetes-worker/0 resume --wait
juju run-action kubernetes-worker/1 resume --wait
juju run-action kubernetes-worker/2 resume --wait

One-liner:

juju status | grep ^kubernetes-worker/ | awk '{print $1}' | tr -d '*' | xargs -n1 -I '{}' juju run-action {} resume --wait

Cleanup

You can now pause the temporary workers to force all pods to migrate back to your “real” workers, then remove the temporary workers.

juju status | grep ^kubernetes-worker-temp/ | awk '{print $1}' | tr -d '*' | xargs -n1 -I '{}' juju run-action {} pause --wait

juju remove-application kubernetes-worker-temp

Mixing Containerd and Docker

Once you have a Containerd backed Charmed Kubernetes running, you can add Docker backed workers like so:

juju deploy kubernetes-worker kubernetes-worker-docker
juju deploy docker
juju relate docker kubernetes-worker-docker

Clusters which previously ran etcd 2.3

If your cluster has run etcd 2.3 at any point in the past, then it is strongly recommended not to upgrade the etcd charm to revision 449. Doing so will cause etcd to lose all of its data. For details, see https://bugs.launchpad.net/charm-etcd/+bug/1843497

We recommend upgrading etcd directly to charm revision 460 instead.

Upgrading to 1.14

This upgrade includes support for CoreDNS 1.4.0. All new deployments of Charmed Kubernetes will install CoreDNS by default instead of KubeDNS.

Existing deployments which are upgraded to Charmed Kubernetes 1.14 will continue to use KubeDNS until the operator chooses to upgrade to CoreDNS. To upgrade, set the new dns-provider config:

juju config kubernetes-master dns-provider=core-dns

Please be aware that changing DNS providers will momentarily interrupt DNS availability within the cluster. It is not necessary to recreate pods after the upgrade completes.

The enable-kube-dns option has been removed to avoid confusion. The new dns-provider option allows you to enable or disable KubeDNS as needed.

For more information on the new dns-provider config, see the dns-provider config description.

Upgrading from 1.9.x to 1.10.x

This upgrade includes a transistion between major versions of etcd, from 2.3 to 3.x. Between these releases, etcd changed the way it accesses storage, so it is necessary to reconfigure this. There is more detailed information on the change and the upgrade proceedure in the upstream etcd documentation.

<span class="p-notification__title">Caution:</span>
<p class="p-notification__message">This upgrade <strong>must</strong> be completed before attempting to upgrade the running cluster.</p>

To make this upgrade more convenient for users of Charmed Kubernetes, a script has been prepared to manage the transition. The script can be examined here.

To use the script to update etcd, follow these steps:

1. Download the script with the command:

curl -O https://raw.githubusercontent.com/juju-solutions/cdk-etcd-2to3/master/migrate

2. Make the script executable:

chmod +x migrate

3. Execute the script:

./migrate

4. etcd OutputSed

The script should update etcd and you will see output similar to the following:

· Waiting for etcd units to be active and idle...
· Acquiring configured version of etcd...
· Upgrading etcd to version 3.0/stable from 2.3/stable.
· Waiting for etcd upgrade to 3.0/stable............................................................
· Waiting for etcd units to be active and idle....................................................
· Waiting for etcd cluster convergence...
· Stopping all Kubernetes api servers...
· Waiting for etcd cluster convergence...
· Stopping etcd...
· Migrating etcd/0...
· Migrating etcd/1...
· Migrating etcd/2...
· Starting etcd...
· Configuring storage-backend to etcd3...
· Waiting for all Kubernetes api servers to restart.......
· Done.

You can now proceed with the rest of the upgrade.

We appreciate your feedback on the documentation. You can edit this page or file a bug here.

See the guide to contributing or discuss these docs in our public Mattermost channel.